BMW and MINI DIY Video – Replace Tie-Rod and Rack Boot, How. Install the new rack boot over the inner tie-rod end and push the boot down the tie-rod so that it. The first step in replacing the inner tie rod is to remove the. Snap shop of installing the inner tie rod. Is to reinstall the boot, and the outer tie rod.

The Ford Escape features a rack-and-pinion power steering system. The inner tie rods connect directly to the power steering rack and the outer tie rods bridge the connection from the inner tie rods to the steering knuckles. When failure occurs between either the inner or outer tie rod, movement known as front end play is the result.

The slightest play in the tie rod end connections can lead to more serious problems. Tire wear, vibrations and steering response are a few examples.

If not repaired, the play will become more prominent and worsen the symptoms. Remove the cotter pin from the outer tie rod end stud using a pair of cutting dikes and discard. The replacement tie rod will feature a new cotter pin. Remove the castle nut using a ratchet and socket or a hand wrench set.

Use an outer tie rod end removal tool to separate the outer tie rod end from the steering knuckle. Other methods could employ a pickle fork or leaving the castle nut on the end of the tie rod end stud and smacking it sharply with a hammer. Since you're replacing the outer tie rod end, it won't matter if you damage the dust boot or tie rod end. Unscrew the outer tie rod end in a counterclockwise motion from the inner tie rod counting how many complete turns to remove it and then recording the count. This will help you install the new one and keep the toe adjustment as close as possible. Keep in mind some aftermarket outer tie rod ends may not have the exact same length as original equipment. Cartoon Sound Effects Pack Torrent. Garritan World Instruments Vst Download.